Pines Gregson Induction Bending machines can process a wide range of materials and with minimum tooling cost. They can be adapted to process structural shapes such as angles, channels and beams. The 8", 10", 12" and 16" range can produce left or right bends. All others are standard left hand bends.
Our induction bending machines are portable and can be
manufactured to meet your needs. All machines are backed up with a one year
service warranty. Installation of the equipment and operator training are
For more information about Pines Gregson Induction Benders, click
Please note that all dimensions are subject to customer requirements and should be used as a general guide only.
Dimension "A" can vary depending on transformer assembly used.
8",10",12", and 16" machines can bend both left and right hand , 24", 30" and 36" standard left hand as illustrated.
The facility to bend left or right hand on machines from 24" to 62"
Push mandrels to accommodate standard and non-standard pipe
Advantages of Induction Bending:
Induction bending like many engineering ideas, owes its
success to its simplicity and effectiveness. It operates on the principle
of heating material by the eddy current effect of an induced electrical current,
a technique which, of course, has been in use for many years. Pines Gregson
Induction Benders will manufacture a machine based on your requirements.
We have a range of products that can handle from 2"-62" pipes.
Save time – Induction bending does not require any sand filling or internal mandrels. The bending times are considerably less than in fire bending or weld fabrication, making the process cost effective.
Cut production costs – Time is money, and cutting down on production and inspection time saves you money.
Improve quality – The quality of the bends with respect to surface finish are equal to that of cold bending, better than fire bending, and in the case of ovality and wall thinning, are superior. As the process eliminates the need for welded or mechanical joints between bends, the integrity of the finished pipework is higher than in any other process.
Flexibility – The bend radius is infinitely variable from 2D centre line radius to infinity. Wall thickness can vary from Schedule 5 up to 2.5" thick with no alteration to the machine's tooling.